A514 GR.F quenched and tempered alloy process flow

Steel plate numerical control cutting processing, A514 GR.F quenched and tempered alloy steel plate cutting processing can be divided into semi-automatic flame cutting, automatic numerical control cutting, laser cutting, water cutting.The thickness range of steel plate can be cut 20-650mm steel plate, the main steel plate processing material is divided into Q235B plate, Q345B low alloy plate, 45# carbon bond plate.

Buy Steel Cut to Size A514 GR.F quenched and tempered alloy - Price and Order Online
13*2970*9800, 20*2125*7500, 16*2000*000, 20.5*1600*6250, 13*2880*9500, 25*3700*5000, 25*1301*4000, 20.5*1600*6250, 12.5*1730*14930, 20*3500*7320, 20*2100*8950, 21.5*2590*6900, 12.5*1970*14100, 20*1680*5580, 32*1301*6600, 24*2715*7800, 30*2830*7100, 12.5*1750*14050, 23*2050*5110, 20.5*1301*4000, 22*3860*8240, 22.5*1820*4700, 16*2500*000, 34*1301*4000, 25.5*3920*5190, 28*2600*6500, 28*1550*4000."

Our company's A514 GR.F quenched and tempered alloy power boilers, heating furnaces of double bars, double high lines and medium and thick plates all adopt heat storage technology, which can fully use blast furnace gas; the ladle baking, Maerz active lime kiln and medium and thick plate heat treatment furnace all burn converter gas, which can improve the A514 GR.F quenched and tempered alloy utilization rate of secondary energy and realize negative energy steelmaking in steelmaking process.

A514 grade Q alloy structural steel chemical composition (melting analysis)%C: 0.14-0.21, Si: 0.15-0.35, Mn: 0.95-1.30, P max.: 0.035, S max.: 0.035, Ni: 1.20-1.50, Cr: 1.00-1.50, Mo: 0.45-0.6.0, V: 0.03-0.08
The mechanical properties in thickness (mm)T≤65Yield strength (≥Mpa): 690Tensile strength (Mpa):760-895Elongation in ≥, %: 18